ӏࡾю
MACHINING CHAMBER
78
ᴹਖ਼ᬲᴻ
<Procedure>
1)
ൡಽໃɥȪɖȬɞǿ
1)
Turn OFF the main power.
2)
ྃཌྷʰʕʍʒɁ۶ϫȾȷȗȲɹ˂ʳʽʒɗҒɝȢȭɥຏ
ોȬɞǿ
2)
Wipe the coolant and chips off of the external surfaces of
the lamp unit.
7
า
7
CAUTION
ൡюྃཌྷɂᯚຣȾȽɝɑȬɁȺǾɗȤȼɥȪȽȗɛșȾ
าȪȹȢȳȨȗǿ
As the external surfaces of the lamp unit reach a high
temperature, exercise extreme care to avoid burns.
3)
ِްщɁɀȫɥɝ۶Ȭǿ
3)
Remove the screws of the clamps.
2
าᜤ
2
NOTE
ྃཌྷʰʕʍʒȟᕶȴȽȗɛșȾਖ਼ȺୈțȹȢȳȨȗǿ
Hold the lamp unit securely to ensure the unit does not fall into the
machine.
4)
ྃཌྷʰʕʍʒɥൡಽȞɜɝ۶Ȭǿᴥ
d
ᴦ
4)
Remove the lamp unit from the machine. (
d
)
5)
፻͇ȤɈȲɥوȪȹǾɶʳʃከȞɜبщɥऀȠҋȬǿᴥ
e
ᴦ
5)
Turning the clamp cap, draw the appliance out of the glass
tube. (
e
)
6)
ާްبɵʚ˂ɥɝ۶Ȭǿᴥ
f
ᴦ
6)
Remove the ballast cover. (
f
)
7)
ᘬбཌྷِްщɥɝ۶Ȭǿᴥ
g
ᴦ
7)
Remove the fluorescent lamp clamp. (
g
)
8)
ᘬбཌྷɥɝ۶Ȭǿᴥ
h
ᴦ
8)
Remove the fluorescent lamps. (
h
)
2
าᜤ
2
NOTE
Ұʤ˂ʂɁَɁɛșȾʇɻʍʒɥ࿁ਖ਼ȺઃȨțȽȟɜǾ୵ɔȾ
ऀȠ˨ȥȹऀȠȗȹȢȳȨȗǿ
Support the base of the fluorescent lamps at the socket with your
hand as shown in the figure on the previous page, raise the
fluorescent lamps to an angle, and pull them out.
7
า
7
CAUTION
ᘬбཌྷɁ۶ȪǾ͇ȤȾǾᦂɁɈȴȺਖ਼ɥҒɜȽȗ
ɛșȾาȪȹȢȳȨȗǿ
Exercise extreme caution to avoid cutting your fingers
on the edges of the sheet metal when removing or
mounting the fluorescent lamps.
9)
Ȫȗᘬбཌྷɥɝ͇Ȥɞǿ
9)
Insert replacement fluorescent lamps.
2
าᜤ
2
NOTE
ɵʋʍȻᬩȟȬɞɑȺʇɻʍʒȾઃȪᣅɒǾᘬбཌྷȟᆬȾષо
ȨɟȹȗɞȞᆬᝓȪȹȢȳȨȗǿ
Insert the fluorescent lamps into the sockets, ensuring that they
click into place and are placed correctly.
10)
ൡಽໃɥੵоȬɞǿ
10)
Turn ON the main power.
11)
;
Ȑൡюྃȑ
ʦʉʽɥɴʽȾȬɞǿ
11)
Press the
;
[LIGHT] (Machine Light)
button to turn ON
the fluorescent lamps.
12)
ᘬбཌྷɁཟཌྷɥᆬᝓȬɞǿ
12)
Make sure that the fluorescent lamps light.
2
าᜤ
2
NOTE
ཟཌྷȪȽȗکնɗཟཌྷȪȾȢȗکնɂǾໃɥȪɖȪȹᘬбཌྷ
ȟඩȪȢɝ͇ȤɜɟȹȗɞȞᆬᝓȪȹȢȳȨȗǿ
If the light is not illuminated or turn ON slowly, turn OFF the main
power and confirm the lamps are inserted correctly.
13)
;
Ȑൡюྃȑ
ʦʉʽɥɴʟȾȬɞǿ
13)
Press the
;
[LIGHT] (Machine Light)
button to turn OFF
the fluorescent lamps.
14)
ൡಽໃɥȪɖȬɞǿ
14)
Turn OFF the main power.
15)
ᘬбཌྷِްщɥɝ͇Ȥɞǿ
15)
Remount the fluorescent lamp clamp.
16)
ާްبɵʚ˂ɥɝ͇Ȥɞǿ
16)
Remount the ballast cover.
17)
ɬʵɽ˂ʵȽȼɥ౫ɒᣅɑȮȲɰɱʃȺǾɶʳʃከɁоɝ
ՠюϫɁɟɥɈȠɞǿ
17)
Wipe off the inner side around the mouth of the glass tube
using a cloth soaked in alcohol.
18)
بщɥɶʳʃከȾષоȬɞǿ
18)
Insert the appliance into the glass tube.
19)
፻͇ȤɈȲɁಘюɥԡఌሳᩖȾࢃȪᣅɦȺ፻ɔɞǿᴥ
s
ᴦ
19)
Insert the guide board of the clamp cap into the
semicircular space and tighten the clamp cap. (
s
)
20)
ࡾщሰȾʓʳɮʚȽȼɥࢃȪᣅɒǾᣡɁտȾوȪȹ፻͇
ȤɈȲɥ፻ɔ͇Ȥɞǿᴥ
t
ᴦ
20)
Insert screwdrivers into the holes and rotate them in
opposite directions to tighten the clamp cap. (
t
)
Summary of Contents for NL1500/500
