FOR SAFE OPERATION -5-
SO-NL-B17E/O
WARNING
6.
The machine specifications are set before shipping so that the
machine can deliver its full performance. If the specifications and/or
settings have to be changed or the machine has to be modified to
meet new machining requirements or due to changes in the
operating conditions, consult Mori Seiki. Changing the settings
without consultation may lead to accidents involving serious
injuries, impaired machine performance, and considerable
shortening of the machine service life.
7.
Before operating or programming the machine, or performing
maintenance work, carefully read the instruction manuals provided
by Mori Seiki, the NC unit manufacturer and the equipment
manufacturers so that you fully understand the information they
contain. Keep these instruction manuals safely so that you do not
lose them. If you do lose an instruction manual, contact Mori Seiki,
the NC unit manufacturer, or the relevant equipment manufacturer. If
you attempt to operate the machine without having carefully read the
instruction manuals first, you will perform dangerous and erroneous
operations which may cause accidents involving serious injuries or
damage to the machine.
8.
Always observe the instructions in the caution labels stuck to the
machine. Carefully read the Safety Guidelines supplied with the
machine so that you fully understand them. If the writing on the
labels becomes illegible, or if the labels are damaged or peel off,
contact Mori Seiki. Also contact Mori Seiki if you cannot understand
any of the labels. If you operate the machine without observing the
instructions on the labels, or without understanding them properly,
you will perform dangerous and erroneous operations which may
cause accidents involving serious injuries or damage to the
machine.
9.
Never operate, maintain, or program the machine while under the
influence of alcohol or drugs. Your concentration will be impaired,
you may loose your balance and fall against dangerous parts of the
machine, and you may operate the machine incorrectly, causing
accidents involving serious injuries or damage to the machine.
10.
Machine operators and authorized personnel working inside the
plant and in the vicinity of the machine must put their clothing and
hair in order so that there is no danger they will be entangled in the
machine. If you have uncontrolled long hair or loose clothing and it
gets caught in the machine, you will be seriously injured by being
entangled in the rotating parts of the machine or crushed by its
moving parts. Always wear safety shoes, eye protectors and a
helmet.