OPERATION PANELS A-17
5-2-1
In the Memory Mode
Turret 1 is selected when the power is turned on.
When the power is turned on, the memory mode is
selected for both turrets.
Pressing the head selection switches
(head 1) and
(head 2) simultaneously selects the turret(s) to be
operated as the sequence shown at left.
Turret is selected in the sequence of 2 to 3.
When the memory mode is selected: Present
turret selection does not change if the head
selection switch
(head 1) or
(head 2) is
pressed.
5-2-2
In Modes Other Than the Memory Mode
(head 1)
Pressing this switch selects turret 1 (turret 1 screen).
(head 2)
Pressing this switch selects turret 2 (turret 2 screen).
Pressing the head selection switches
(head
1) and
(head 2) simultaneously has no effect.
Turret 1 or 2 that is currently selected is indicated with
"HEAD1" or "HEAD2" on the right side above the soft-key
names on the screen.
1
2
1
2
1. Memory mode for both turrets (Power ON)
2. Memory mode for turret 1
3. Memory mode for turret 2
NOTE
1
2
1
2
1
1
2
2
NOTE
1
2
