A-34 OPERATION PANELS
The status indicator
[TRCL]
shows whether the turret head is clamped correctly
or not.
Automatic operation is impossible unless this indicator is lit.
When turret 1 is selected by pressing the head selection switch
(head 1),
this indicator shows the turret 1 clamping status.
When turret 2 is selected by pressing the head selection switch
(head 2),
this indicator shows the turret 2 clamping status.
The status indicator
[TRCL]
is lit when the turret has been indexed and clamped
correctly.
The status indicator
[TRCL]
blinks if the turret has not been indexed correctly.
The status indicator
[X/Z]
is lit when the X-/Z-axis has been returned to the zero
point.
These indicators are used to check if the axes have returned to the zero point.
When turret 1 is selected by pressing the head selection switch
(head 1),
this indicator shows that the X- and Z-axes of turret 1 have been returned to the
zero point.
When turret 2 is selected by pressing the head selection switch
(head 2),
this indicator shows that the X- and Z-axes of turret 2 have been returned to the
zero point.
<M type>
The STATUS indicator
[C]
on the option panel is lit when the C-axis has been
returned to the zero point.
This indicator is used to check if the axis has returned to the zero point.
1.
Since this machine has no Y-axis specification, the STATUS
indicator
[Y]
is not used.
2.
The STATUS indicators at the turret 2 side are not used with this
machine.
Status Indicator
Contents of Indication
TRCL
1
2
X
Z
1
2
2
1
STATUS
NOTE
