OPERATION PANELS A-41
5-10
Axis Feed Switches
The axis feed switches are used to manually move an axis.
1.
These switches are not operative when the PANEL key-switch is placed in the
(OFF) position.
2.
Close the front door before moving the axis.
These switches are used for the following axis feed operations:
1.
Jog feed
2.
Rapid traverse
3.
Zero return
Select the axis to be moved and the feed direction and initiate axis feed with these switches.
<M type>
With the M type machine, the
(
−
C) and
(+C)
switches on the option panel are used to move the C-axis
at jog feedrate or rapid traverse rate and also to return it
to the zero point.
1.
The
(
−
C) and
(+C) switches are
valid only when turret 2 is selected by
pressing the head selection switch
(head 2).
2.
Since this machine has no Y-axis
specification, the
(Y) switches on the
option panel are not used.
NOTE
Z
Z
X
X
Y
Y
C
+C
AXIS
DIRECTION
–C
+C
NOTE
–C
+C
2
Y
