A-44 OPERATION PANELS
5-13-1
Axis Selection Switches
The axis selection switches are used to select the axis (X
or Z) to be moved in the handle mode.
The selected axis is displayed in the display unit.
5-13-2
Axis Feed Amount Selection Switches
The axis feed amount selection switches are used to
determine the axis feed amount per pulse when an axis is
moved with the manual pulse generator.
When the switch is pressed, the indicator in the switch is
lit.
<Axis feed amount per pulse>
1.
When the power is turned on, the setting of the axis feed amount selection switch
(
×
1) is selected to ensure safety.
2.
When the operation mode is changed from automatic to manual, the axis feed
amount selection switch
(
×
1) is selected to ensure safety.
Switch
Function
The switch is used to select the Z-axis.
With the M type machine or the machine equipped with a servo-
controlled tailstock, each time this switch is pressed, an axis is selected
in order of X, Z, and C (M type) or B (servo-controlled tailstock
specification).
The switch is used to select the X-axis.
With the M type machine or the machine equipped with a servo-
controlled tailstock, each time this switch is pressed, an axis is selected
in order of B (servo-controlled tailstock specification) or C (M type), Z,
and X.
Setting
X- and Z-axes
B-axis (Servo-controlled
Tailstock Specification)
C-axis (M type)
×
1
0.001 mm
0.001
°
×
10
0.01 mm
0.01
°
×
100
0.1 mm
0.1
°
Display unit
NOTE
NOTE
×
1
×
10
×
100
NOTE
×
1
×
1