MANUAL OPERATION B-47
9)
Start the rotary tool spindle.
<Normal direction>
Press the
(NOR) switch.
<Reverse direction>
Press the
(REV) switch.
10)
Increase the spindle speed gradually to the required
speed.
<Spindle speed setting switch
(decrease)>
The override value decreases in units of 1%.
<Spindle speed setting switch
(increase)>
The override value increases in units of 1%.
<Stopping the rotary tool spindle>
1)
Decrease the spindle speed gradually to the lowest
speed with the spindle speed setting switch
(decrease).
2)
Press
(STOP) switch.
To change the rotary tool spindle rotating
direction, stop the rotary tool spindle by pressing
the
(STOP) switch, then select a new rotating
direction.
NOR
SPJ
REV
STOP
NOR
SPJ
REV
STOP
NOR
SPJ
REV
STOP
NOTE
