C-6 CHUCKING
WARNING
5.
Select the appropriate chucking pressure and tailstock spindle
thrust force (applies only to machines equipped with a tailstock) for
the workpiece shape and material, and the cutting conditions. If you
cannot determine the appropriate chucking pressure, contact the
chuck manufacturer or cylinder manufacturer. If you cannot
determine the appropriate tailstock spindle thrust force (applies only
to machines equipped with a tailstock), contact Mori Seiki. If the
chucking pressure or tailstock spindle thrust force (applies only to
machines equipped with a tailstock) is not set appropriately in
accordance with the shape and material of the workpiece being
machined and the cutting conditions, the workpiece could fly out of
the chuck during machining, causing serious injuries or damage to
the machine. Incorrect setting could also distort the workpiece.