MANUAL OPERATION B-69
15
MANUAL OPERATION OF THE STEADY REST
(STEADY REST SPECIFICATIONS)
The following steady rest manual operation can be performed by using the STEADY REST
MANUAL OPERATION screen.
•
Steady rest OPEN/CLOSE operation
•
Steady rest OUT/IN operation
•
Steady rest CLAMP/UNCLAMP operation
The CLAMP/UNCLAMP operation cannot be performed with the servo-controlled steady
rest specification machine.
15-1
Procedure for Steady Rest Manual Operation
1)
Select the MDI mode.
2)
Press the function selection key
(CUSTOM1) to display the PCMDI MENU
screen.
3)
Input "6" with the data entry keys, and press the INPUT key.
The STEADY REST/WORK REST MANUAL OPERATION screen is displayed.
This screen can also be displayed by pressing the function selection key
(CUSTOM1) and the
[STEADY REST]
soft-key.
4)
Input the number of the "ACTION" to be executed by using the data entry keys and press the
INPUT key.
5)
Press the
[EXEC.]
soft-key.
While the operation is being executed, the item in the "ACTION" field flashes. When the
operation has been completed, the item in the "STATUS" field is highlighted.
NOTE
