Quick Start Guide
1
4
Specifications:
© 2022 Morningstar Corporation. All Rights Reserved.
MS-xxxxxx v0 (B02)
In the Box:
#10 Mounting Screws (x4)
Tools Required:
#2 Philips Screwdriver
3/16 (5 mm) & 1/8" (3.8 mm) Flathead
Screwdriver
Drill with a 1/8" (3.8 mm) bit
Multimeter
Crimping Tool
Wrench
WARNING: Hazardous Voltage
The SureSine Inverter must be installed by a
qualified
technician in accordance with the
electrical regulations of the country of
installation.
Scan QR Code to go directly
to the SureSine Inverter
Installation Manual and
warranty information online.
Contact Information:
Technical Support:
morningstarcorp.com/support
Phone:
1-215-321-4457
Contact Information:
Technical Support:
morningstarcorp.com/support
Phone:
1-215-321-4457
SureSine Inverter
Warranty Registration:
https://www.morningstarcorp.com/product-registration/
150 W, 300 W & 700 W Models
(Factory-wired Versions ONLY)
SureSine Inverter Models:
For use with 12 Vdc, 24 Vdc,
or 48 Vdc Systems
CAUTION:
This guide must be used with the full product manual that includes important
information. Carefully read the SureSine Inverter product manual for all specifications,
safety, regulatory and warranty information, and for all required instructions on
installation procedures, configuration, and operation.
Battery Voltage
12 Vdc, 24 Vdc, or 48 Vdc
AC Output Voltage (Vac) /
Frequency
120 Vac / 60 Hz
127 Vac / 50 Hz
, or
230 Vac / 50 Hz
Load Current
Battery Current
Rated Power
Communication
Options
150 W / 300 W / 700 W
Remote Switch,
Bluetooth, EIA-485, MS-CAN
AC Interface
Options
Type-B Outlet or
UNI Universal AC Outlet
DIP 2:
ALARM
SOUND
DIP 1:
OPERATIONAL
CONTROL
DIP 3 & DIP 7:
NOT USED
(DEFAULT IS
OFF)
DIP 4:
LOW VOLTAGE
DISCONNECT
(LVD)
DIP 5:
LOW VOLTAGE
DISCONNECT
(LVD) PRESETS
DIP 6:
STANDBY
MODE
DIP 6 OFF =
AC Output
Always ON
DIP 6 ON =
AC Output
OFF < 8 W
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 8:
BLUETOOTH
COMMUNICA-
TIONS
Partial Specification List only.
For the complete list
of specifications, see the SureSine Installation and
Operation s Manual.
DIP Switch Settings:
IMPORTANT:
The SureSine Inverter is designed for
converting DC power to AC power only.
It will not charge batteries.
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
LED Indications:
No power or Battery
below 9.5 V
OFF
AC Output OFF
GREEN
AC Output ON
GREEN
AC Standby Mode
GREEN
Low Voltage Disconnect
(LVD) Warning
GREEN
Low Voltage Disconnect
(LVD)
GREEN
Inverter or System Fault*
RED
Inverter or System Fault*
RED
OFF
OFF
GREEN
GREEN (BLINK)
RED (BLINK)
RED
RED
OFF
Operation or State
STATUS LED
AC Output LED
AC Output Mode Switch:
I
O
II
(Front View)
ON
OFF
Press the
|
Put the switch in
a neutral position
(Side View)
REMOTE
Press the | |
(Side View)
(Side View)
(Front View)
(Front View)
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 8 ON =
Bluetooth Enabled
DIP 8 OFF =
Bluetooth Disabled
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 1 ON =
Digital Control
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 1 ON =
Digital Control
1 2 3 4 5 6 7 8
DIP 1 OFF =
Switch Control
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 1 OFF =
Switch Control
1 2 3 4 5 6 7 8
DIP 2 ON = Alarm
is Enabled
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 2 ON = Alarm
is Enabled
1 2 3 4 5 6 7 8
DIP 2 OFF = Alarm
is Disabled
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 2 OFF = Alarm
is Disabled
1 2 3 4 5 6 7 8
DIP 4 ON = Presets
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 4 OFF = Custom
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 4 OFF = Custom
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
DIP 5 ON = 11.5 V
DIP 5 OFF = 10.5 V
DIP 5 ON = 23.0 V
DIP 5 OFF = 21.0 V
DIP 5 ON = 46.0 V
DIP 5 OFF = 42.0 V
For 12 Vdc Systems:
For 24 Vdc Systems:
For 48 Vdc Systems:
I
O
II
I
O
II
Terminal Resistor
