2-46
4.4 PRECAUTIONS DURING OPERATION
Always follow these precautions when carrying out operations.
Failure to follow these precautions may lead to a serious injury or accident.
[1] PRECAUTIONS FOR JOBSITES
• As far as possible, select firm, level ground.
When working on slopes or extremely uneven ground, the change in the center of gravity when the dump is operated may
cause the machine tip over.
• As far as possible, avoid the edge of cliffs or ground which may collapse.
If work must be carried out in such places, set up blocks to prevent the machine from going near the edge or near retaining
walls, or position a signalman and take other necessary steps for ensuring safety.
• When dumping a load from a high point, always position a signalman and follow the signals.
The signalman must always check the safety of the dumping point carefully.
[2] PRECAUTIONS FOR LOAD
• Do not overload the machine.
Do not fit side racks or plates, or make other modifications to extend the size of the dump body to increase the load.
• When loading the dump body, always spread the load uniformly.
Loading the dump body unevenly will cause instability and may cause the machine to tip over.
• Be careful not to let the loading bucket or crane hook hit the dump body or flaps.
• When loading large rocks, first load the dump body with fine soil, then load the rocks on top of that.
• When handling long objects, such as logs or steel beams, load carefully and pay careful consideration to the center of gravity
so that the load does not collapse or sway excessively during hauling operations.
Tie down such loads securely with rope.
If necessary, use blocks and take steps to prevent the rope from slipping.
• When loading stacks of U-shaped ditch liners or concrete blocks, lay a steel sheet and secure with rope, and take other steps
to prevent the load from slipping.
Summary of Contents for MST-800VD
