Using the sandwich
holder
(4 slice only)
Place your sandwich in the sandwich
holder
‰ C
.
Place the loaded sandwich holder into
one of the bread slots
D
.
Set the browning control to the required
setting. Depress the relevant bread lever.
WARNING: Do not overfill the
sandwich as the heated contents may
leak into the toaster.
After the set time has been reached the
toasting cycle will finish. Remove the
sandwich and holder.
Hints & tips for perfect toasting
•
For best results ensure the bread slices
are of even thickness, freshness and size.
•
Stale bread toasts more rapidly than
fresh bread. Therefore, the browning
control should be set at a lower setting
than usual.
•
Thin bread toasts quicker than thick.
•
In order to achieve uniform browning, we
recommend you wait a minimum of 30
seconds between each toasting so that
the control automatically resets.
•
If toasting one slice only, you may need
to adjust the browning control to a
slightly lower setting.
•
You may notice a slight variation in toast
colour on one side of a single slice.
•
All sorts of bread can be used as well as
teacakes, small rolls etc. Slices should
not however be so thick as to cause
burning or jamming within the bread
slots.
•
When toasting more than one slice it is
recommended they are of equal size and
freshness.
Crumb trays
E
WARNING: Crumbs will accumulate
in the crumb tray and could catch fire if
not emptied periodically.
When the toaster has cooled down
completely, tap the sides of the case lightly
to dislodge any crumbs lodged in the
toasting chamber and remove the crumb
trays
·
. Empty the tray and replace it.
Never operate the toaster without the
crumb trays fitted.
Cleaning and
maintenance
1
After use and before cleaning, remove the
plug from the wall socket and wait for the
toaster to cool.
2
Wipe the outside of the toaster with a
damp cloth only and dry with another
cloth or tissue.
•
NEVER use metal polish or coarse
5
C
D
E
44061 rev3 10/10/05 10:04 AM Page 5
