background image

3

For details of other Morphy Richards products, please see our website:

Other safety
considerations

Do not leave appliance
unattended whilst in use.

Do not operate any appliance
with a damaged cord or plug
or after the appliance
malfunctions or has been
damaged in any manner.
Contact Morphy Richards for
advice.

The use of attachments or
tools not recommended or sold
by Morphy Richards, may
cause fire, electric shock or
injury.

Do not attempt to connect any
other appliance to the base
unit or this appliance to
another base unit.

Do not tamper with the
connector in any way.

Do not use the appliance for
any use other than to boil
water.

Do not place the appliance on
or near a hot gas or electric
burner or in a heated oven.

The appliance must not be on
the base unit when being filled
with water.

Morphy Richards recommends
that the mains lead of the
cordless base cannot be
repaired. If the mains lead is
damaged, the cordless base
should be discarded and
replaced. Contact the helpline
for advice.

Unplug from the outlet when
not in use.

Use only with the cordless
base unit supplied.

WARNING: The appliance
must not be immersed for
cleaning.

CAUTION: To prevent
damage to te appliance, do
not use alkaline cleaning
agents when cleaning, use a
soft cloth and detergent. 

ELECTRICAL
REQUIREMENTS

Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must
be A.C. (Alternating Current).

If the sockets in your home are
not suitable for the plug
supplied with this appliance,
the plug supplied should be
removed and the appropriate
one fitted. 

WARNING: The plug removed
from the mains lead, if
severed, must be destroyed
as a plug with a bared flexible
cord is hazardous if engaged
into a live socket. 

Should the fuse in the 13 amp
plug require changing, a 13
amp BS1362 fuse must be
fitted.

WARNING: This appliance
must be earthed.

Features

Lid

¤

Lid knob

Spout filter

Concealed element

360°connector

Cordless base unit

Cord storage

·

On/off switch

Water level indicator

Quiet boil element

Whistle on/off switch

¤

·

43880 rev2:43880  23/10/2009  15:16  Page 5

Summary of Contents for 43880 SS TRADITONAL KETTLE







Reviews: