5
Toasting
1
Select the desired level of browning
on the browning control
‹
marked
1 to 8. The setting required will vary
according to the moisture content
and thickness of the bread.
2
After selecting the desired level,
place your bread in the slots
⁄
and
depress the bread carriage lever
¤
downwards until it locks. The end
panel will illuminate
A2
.
3
After the set time has been reached
the bread will pop up automatically
ready for removal from the slots.
The bread carriage lever will have
returned to its upper position and
the heating element will have
switched off.
•
If the bread in your toaster becomes
jammed disconnect your toaster at
the socket, allow it to cool, then
remove the bread.
•
When not in use, remove the plug
from the mains socket.
•
Allow the toaster to cool fully before
putting away.
WARNING: Do not wrap the
cable around the main body of
the appliance during or after
use.
Using the re-heat button
If your toast has popped up and
gone cold, the toaster offers a re-
heat facility. To use, depress the
bread carriage lever and press the
re-heat button
fl
immediately. The
button will illuminate and the toaster
will operate for a short period re-
heating the bread.
Using the cancel button
If you wish to interrupt the toasting
process, press the cancel button
fi
.
Using the frozen button
To toast frozen bread do not adjust
the browning control from your
normal preferred setting, place the
bread normally in the bread slots,
then depress the bread carriage
lever and press the frozen button
‡
.
Using the bagel button
To toast bagels, set the browning
control to your preferred setting.
Cut the bagels in half. Place the
side that you would prefer to be
browner towards the centre.
Depress the bread carriage lever
and press the bagel button
›
.
On the 4 slice version the bagel
button only works on the 2 slice
option.
For frozen bagels also press the
frozen button.
Using the bun warmer
Unfold the legs of the bun rack and
clip it on top of the toaster ensuring
it is securely in place
A3
.
Place the buns or other items onto
the bun warmer. Set the browning
control to the bun warmer position
·
. Depress the bread carriage lever
until it holds down. Wait for the
toaster to switch off automatically or
press the cancel button to switch
the toaster off before removing the
buns.
WARNING: Take care not to
touch the metal of the bun
warmer as it will be hot.
Do not put more than two buns on
the bun warmer at any one time.
Hints & tips for perfect
toasting
•
For best results ensure the bread
slices are of even thickness,
freshness and size.
•
Stale bread toasts more rapidly than
fresh bread. Therefore, the browning
control should be set at a lower
setting than usual.
•
Thin bread toasts quicker than
thick.
•
In order to achieve uniform
browning, we recommend you wait
a minimum of 30 seconds between
each toasting so that the control
automatically resets.
•
If toasting one slice only, you may
need to adjust the browning control
to a slightly lower setting.
g
TT44417MEERev2 8/9/08 2:09 pm Page 5
