background image

2

In addition, we offer the following safety advice.

Location

This appliance is intended to be used in household and
similar applications such as:

farm houses;

by clients in hotels, motels and other residential type 
environments;

bed and breakfast type environments. 

It is not suitable for use in staff kitchen areas in shops,
offices and other working environments. 

Do not use outdoors or in a bathroom.

Always locate your appliance away from the edge of the
worktop.

Do not place the bowl used with the appliance on a
highly polished wooden surface as damage may occur to
the surface.

Mains cable

Do not let the mains cable hang over the edge of the
worktop where a child could reach it.

Do not let the lead run across an open space e.g. 
between a low socket and a table.

Do not let the cable run across a cooker or other hot area
which might damage the cable.

The mains cable should reach from the socket to the
base unit without straining the connections.

The power cord cannot be replaced. Contact Morphy
Richards for advice.

Personal safety

Avoid touching moving parts. Keep hands, hair and 
clothing, and utensils away from the hand mixer 
attachment blades during operation, to prevent personal
injury and/or damage to the appliance.

Care shall be taken when handling the sharp cutting
blades, emptying the bowl and during cleaning.

Do not allow children to use the blender without 
supervision. 

Other safety considerations

Do not use the appliance for anything other than it’s 
intended purpose.

The use of attachments or tools not recommended or
sold by Morphy Richards may cause fire, electric shock
or injury.

Product specific safety

IMPORTANT: Allow hot liquids to cool before adding to
the blender, always ensure the lid is fitted correctly.

Do not overfill the blender. This could cause damage to
the motor. The plug fuse will blow if the blender is 
overloaded. Replace the fuse and do not exceed the
maximum recommended volumes. Refer to the

‘Attachment guide’ on page 5.

Be careful if hot liquid is poured into the blender as it can
be ejected out of the appliance due to sudden steaming.

Always disconnect the blender from the supply if it is left
unattended and before assembling, dissasembling or
cleaning. 

CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not
be supplied through an external switching device, such
as a timer or connected to a circuit that is regularly
switched on and off by the utility.  

Do not use the appliance if the glass jar or lid is damaged
or has visible cracks.

CAUTION: Ensure that the blender is switched off before
removing it from the stand. 

Electrical requirements

Check that the voltage on the rating plate of your 
appliance corresponds with your house electricity supply
which must be A.C. (Alternating Current).

Should the fuse in the mains plug require changing, a 

5

amp BS1362 fuse must be fitted.

WARNING: This appliance must be earthed.

The use of any electrical appliance requires the following common sense safety rules. 

Please read these instructions carefully before using the product. 

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental 
capabilites, or lack of experience and knowledge, if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.  

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children
without supervision.

Health and Safety 

401001_Layout 1  22/03/2013  14:53  Page 2

Summary of Contents for Accents 401001













Reviews: