3
4
4
Unplug from the mains before twisting the
Blending Leg to unlock from the Main Unit.
To clean the Blending Leg, rinse under running
water and clean with a damp cloth.
3
3
Hold the Beaker steady with your hand and
press and hold the On Button
(2)
to start. Move
the Blade
(5)
through the food using an up and
down motion. Release the button to stop
BEFORE
removing the blade from the food.
2
Place the Blending Leg into the food to be
blended. We recommend using the Beaker
(6)
for the best results.
1
1
Insert the Blending Leg
(4)
onto the Main Unit
(1)
and twist to secure into place.
•
The Hand Blender is fitted with a Turbo Button
(3)
.
Press the Turbo Button to run the Hand Blender
on a faster speed for intermittent bursts.
•
The processor attachment must be run only using
the turbo setting.
•
WARNING: Your Hand Blender is designed for
intermittent use. Do not use continuously for
more than 1 minute. Allow to cool down for a
minimum of 5 minutes before further use.
•
Do not use the Blending Leg
(4)
continuously for
more than 10 seconds when lifted out of food.
•
The processor attachment can only be used
with the Turbo Button
(3)
. Using a lower setting
may cause irreparable damage to the motor.
Turbo Button
Usage
Using the Blending Leg
Thank you for your recent purchase of this
Morphy Richards Hand Blender Work Centre. The
set comes with a number of attachments and a
‘quick twist’ connection mechanism for safety.
Please read the instructions thoroughly for
information on how to use each attachment
before use.
Remember to visit www.morphyrichards.co.uk to
register your product’s two year guarantee.
•
Wash all the attachments except the Main Unit
(1)
and Cover
(12)
in hot soapy water and dry
throughly before first use.
•
Do not immerse the Main Unit or Cover in water.
•
WARNING: Carefully unpack your Hand Blender
Work Centre as the blades are very sharp.
Before first use
Introduction
48917_Layout 1 16/04/2012 15:34 Page 3
