9
www.morphyrichards.com
VEGATABLE SHREDDER
ATTACHMENT
•
Always unplug the product before
putting on or taking off attachments
•
Remove the attachment hub cover
at the front of the product
N
.
Features
⁄
Food pusher
¤
Main housing and feed tube
‹
Drive shaft
›
Fine grating / shredding cone
fi
Cone retaining collar
fl
Coarse grating / shredding cone
‡
Fine slicing cone
·
Coarse slicing cone
Assembly instructions
•
Choose the appropriate cone for the
application.
•
Affix the shaft to the cone by
aligning the fixing tabs on the shaft
to the holes in the base of the cone
O
.
•
Twist the shaft clockwise to lock
into place.
•
Locate the shaft end into the main
housing hub.
•
Screw the cone retaining collar into
place. Take care when fitting the
collar to prevent damage to the
product.
•
Hold down the attachment retainer
pin whilst fitting the attachments.
•
Align the flats of the shaft end to
approximately the same angle as
that of the drive and insert into the
drive
P
.
•
Rotate the attachment slightly until
it locates to the drive and push into
place
Q
.
•
Release the attachment retainer pin
and rotate the attachment slightly
until the hole on the attachment
locates to the retainer pin on the
main unit drive hub
R
.
g
⁄
¤
‹
fl
fi
›
‡
·
N
P
O
Q
R
FP48955MEE-Rev2 16/1/07 10:46 Page 9