8
1.
Firstly assemble the Driving Shaft
(8)
into the Motor
Base
(9)
, make sure it is locked into position.
2.
Place the Chopping Jug
(7)
on the Motor Base
(9)
aligning the unlock position and turn the Chopping
Jug
(7)
clockwise until it locks into position. Ensure
it is assembled in place correctly, otherwise the
appliance will not operate.
3.
Insert the Whisk
(5)
onto the Driving Shaft
(8)
securely.
4.
Place the ingredients into the Chopping Jug
(7)
. You
can use it to prepare mayonnaise, sauces, egg
whites, meringues (up to 10 egg whites), and whip
cream.
5.
Place the Jug Lid
(16)
onto the Chopping Jug
(7)
and turn it clockwise until the lid locks into place.
Make sure it is locked in position correctly,
otherwise the appliance will not operate.
6.
Set the Speed Dial
(10)
to high speed setting 2.
NOTE: Never use this Whisk
(5)
to knead dough
or mix cake mixtures.
7.
Remove the Chopping Jug from the motor base,
then remove the Lid
(3)
, Food Pusher
(1)
and Whisk
(5)
. Then pour to empty the contents of the jug.
Caution: The total operating time should not be
more than 2 minutes
1.
Disconnect from the power socket before cleaning
2.
Immerse the Chopping Jug
(7)
, Lid
(3)
, Food Pusher
(1)
and Whisk
(5)
in warm soapy water and clean
with the aid of a cloth or soft brush. Then dry
thoroughly.
3.
Wipe the outside of the Motor Base
(9)
with a damp
cloth. Never immerse the Motor Base
(9)
in water.
Then dry thoroughly.
Beating & Whisking
Cleaning After Beating
& Whisking
FP401011 MUK REV 1.qxp_Layout 1 10/08/2016 11:40 Page 8
