8.
To ensure optimum performance, you will need to replace the straightener back in the base
approximately every 4 minutes. It’s really easy to do this while you section the next piece of
hair to straighten. Leave the straightener in the base for a few seconds and full temperature
will be regained. ‘Ready’ will begin to flash on the digital display to indicate the straightener
has reached full temperature and is ready to use again.
9.
Don’t forget to switch off your straighteners at the base unit by pressing and holding the
on/off button.
10.
Never wind the mains cable around the straightener – use the cable storage available in the
base unit.
WIRING
The product is fitted with a 13A (BS1363) plug. A 13A fuse (BS1362) must be used. Check the
voltage on the rating plate of your appliance corresponds with your house electricity supply which
must be AC (Alternating Current). If the socket outlets in your home are not suitable for the plug
supplied with this appliance the plug should be removed and an appropriate one fitted.
IMPORTANT: THE PLUG, REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE
DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED
INTO A LIVE SOCKET OUTLET.
Summary of Contents for IB22071
Page 2: ......
