Dough blade
Î
1
Fit the processor bowl as
detailed previously.
2
Fit the plastic dough blade
over the motor shaft and
press firmly into place.
3
Place the ingredients into
the bowl.
4
Fit the lid and click into
place as detailed in the
‘Setting up’ section.
5
Fit the food pusher.
6
Plug in the processor.
7
Turn the processor on
selecting maximum speed
and proceed until the dough
forms into a ball.
8
Remove the blade from the
bowl before the dough.
IMPORTANT: When
kneading dough, do not
operate the machine longer
than 30 seconds.
Afterwards wait at least 2
minutes before operating the
machine again.
WARNING: For safety
always leave the pusher
in place whilst operating
the processor.
Whisk
attachment
Á
&
Ë
1
Fit the processor bowl as
detailed previously.
2
Click the whisk head
Ë
into
the short extension of the
whisk arm
Á
.
3
Place the long extension of
the whisk attachment onto
the motor shaft
fi
.
4
Add ingredients into the
bowl.
5
Fit the lid, food pusher and
click into place as detailed
in the ‘Setting up’ section.
6
Plug in the processor.
7
Turn the processor on
selecting maximum speed.
IMPORTANT: Never use the
whisk attachment for dough
kneading.
Grating
blades
Ï Ì Ó
1
Place the blade of your
choice on the blade holder
Ô
.
2
Press both ends of the
blade onto the blade holder
until it ‘clicks’ into place.
3
Fit the processor bowl as
detailed previously.
4
Fit the spindle into the hole
underneath the blade holder
and turn clockwise to lock
into position.
5
Fit it over the motor shaft
and press firmly into place
as indicated.
WARNING: Use extreme
caution -blades are
sharp.
6
Fit the lid and click into
place as detailed in the
‘Setting up’ section.
7
Plug in the processor and
select the appropriate
speed.
8
Use the food pusher
Ê
to
add food into the processor
bowl through the feeder
tube.
Adjustable slicing
blade
Ú
1
Adjust the slicing blade to
the thickness you require
and turn anti-clockwise to
increase the blades height
and clockwise to reduce.
2
Fit the processor bowl as
detailed previously.
3
Fit it over the motor shaft
and press firmly into place
as indicated.
WARNING: Use extreme
caution -blades are
sharp.
4
Fit the lid and click into
place as detailed in the
‘Setting up’ section.
5
Plug in the processor and
select the appropriate
speed.
6
Fit the large food pusher
Â
into the tube on the
processor lid.
7
Use the small food pusher
Ê
to add food into the
processor bowl through the
feeder tube.
6
