Operating Instructions
Operating Instructions
Operating Instructions
Operating Instructions
Operating Instructions
Before using your multi-chopper, wash the
glass bowl, chopping blade, anti-spill cover and
whisk attachment in warm soapy water. Dry
thoroughly.
Your Toledo multi-function chopper can chop,
whisk and blend.
Chopping and Blending
5
1 Place the nonslip pad
(flat face up) on
a flat surface and position the glass bowl
on top of it.
2 Place the chopping blade
over the
shaft
in the centre of the glass
bowl.
3 Place the food items to be chopped or
blended in the glass bowl
. Refer to
the processing guide (page 7) for
quantities.
The cover should fit securely inside the rim
when correctly positioned.
5 Place the motor housing
on top of the
bowl
so that the on/off switch
is
either in line with the handles of the bowl
or at 90
o
.
The motor housing will drop
down and will not rotate when correctly
positioned.
6 Insert the plug into the power outlet and
then turn the power on.
7 Hold down the motor housing
with
one hand, and press down on the on/off
switch
with the other hand to activate
the chopper. Use short pulses until the
desired consistency is achieved.
The Toledo is a powerful 400w multi-chopper
which is designed for intermittent use.
Do not operate non-stop for more than 10
seconds. Allow unit to cool down
between pulses.
If the ingredients stick to the sides of the
bowl during chopping, scrape down the sides
of the bowl with a spatula, then continue
chopping.
CAUTION : Do not operate the appliance
when the bowl
is empty.
8 When you have finished chopping or
blending turn the power off at the power
outlet. Remove the motor housing
and
anti-spill cover
from the bowl. Carefully
remove the chopping blade
. You can now
empty the contents of the bowl.
4 Place the anti-spill cover
inside the rim
of the glass bowl
aligning the ridges in
the rim with the indents in the cover.