6
Reassemble
1
Replace the filter basket ensuring that the
seal is good
F.
Then replace the pod
onto the main body.
G
Motor protection
filter
This cleaner is fitted with a motor
protection filter. NEVER USE THE VACUUM
CLEANER WITHOUT THIS IN PLACE.
To clean the motor protection filter
1
Remove the filter from the filter grille.
H
2
Rinse the filter in lukewarm water and
DRY THE FILTER COMPLETELY.
3
Put the filter back into the filter grille and
reassemble.
Storage position
The vacuum cleaner can be stored in an
upright position. slide the storage hook
„
into the slot on the base of the product
Â
and the tubes, hose and floor nozzle are held
securely.
I
F
G
H
I
73190 Rev 1 28/4/04 6:23 PM Page 6
