If you need any further advice, please call our Technical
Helpline on 08450 777700 (Mon-Fri)
5
This apparatus must be protected by a 3A fuse (BS 1362) in a 13A plug (BS1363), or by a
5A fuse in the plug, adaptor or distribution board if another type of plug is used.
Disconnect the mains plug from the wall socket when not in use. To avoid risk of electric
shock do not remove the cover of the apparatus. There are no user serviceable parts inside.
To prevent fire or shock hazard do not expose this apparatus to moisture.
The product must not be exposed to dripping or splashing.
The wire which is coloured Blue must be con-
nected to the terminal in the plug which is
marked with the letter ‘N’ or coloured Black.
The wire which is coloured Brown must be
connected to the terminal in the plug which is
marked with the letter ‘L’ or coloured Red.
No connection must be made to the Earth ter-
minal of the plug marked with
the letter ‘E’ coloured green or green and
yellow.
As the colours of the wires in the mains lead of the apparatus may not correspond with the
colour marking identifying the terminals in your plug, proceed as follows,
Power Supply
Before connecting to the power source ensure that the requirements stated on the rating plate
of the apparatus correspond to the available supply
i.e. 230V 50Hz. If your product needs to be fitted with a plug, proceed as
follows:
CONNECTING TO POWER - IMPORTANT
The wire in the mains lead of the apparatus are coloured in accordance with the following:
Blue - Neutral (N)
Brown - Live (L)
