6
•
There is a Safety Seal
(12)
in place on both the
Blade Lids
(10)
,
(11)
. This is to prevent leakage
from your Nutri Fusion Blender when in use and
for when the Beaker
(7)
or
(9)
is upside down.
•
When inserting the Safety Seal
(12)
, ensure that it
is pressed tightly into the channel in the Blade
Lid. Ensure the Safety Seal
(12)
is correctly
located before the Beaker or Blending Jug
(3)
is
screwed onto the Blade Lid
(10)
,
(11)
.
•
After screwing the Blade Lid
(10)
,
(11)
onto the
Beaker
(9)
or Blending Jug
(3)
, look inside to
check the Safety Seal
(12)
is securely fitted before
attaching to the Main Unit
(4)
.
•
Always ensure the Safety Seal
(12)
is in place
before use. Failure to do so could cause damage
to the appliance.
•
The Safety Seal
(12)
only needs to be removed for
cleaning. After cleaning ensure the Safety Seal
(12)
is reinserted as directed before using the
Nutri Fusion Blender.
Do not operate your Nutri Fusion Blender
continuously with the Beakers
(7)
,
(9)
or Blending Jug
(3)
for more than 40 seconds.
After using for this length of time, allow to cool
down for
10 minutes before using again.
•
If using ice in a recipe (i.e. blending it with other
liquids). Do not use more than 6 ice cubes.
•
Only crush ice as part of the recipe - do not crush
ice on its own.
Safety Seal
Usage
Crushing Ice
8
Unscrew the Blade Lid
(10)
,
(11)
from the
Beaker. For drinks on the go, attach a Lid
(6)
,
(8)
to the Beaker.
7
Hold the Blade Lid
(10)
,
(11)
and twist to
unlock from the Main Unit.
DO NOT hold the
Beaker.
FP403043 MUK REV 2.qxp_Layout 1 14/11/2017 09:55 Page 6