4
Components of your iron
Iron unit
⁄
Steam button
¤
Temperature control dial
‹
Sole plate
›
Temperature indicator light
fi
Supply cord from base unit
Base unit
fl
Anti-scale cartridge
‡
Water tank
·
Power cord
‚
Power switch with indicator light
„
Boiler temperature indicator light
Steam Facility (certain models only)
‰
Spray unit
Â
Spray bottle (20ml)
Location
Locate the steam generator horizontally
on the iron rest plate of your ironing board (if
large enough) or on a heat resistant stand at
the same height as your ironing board or
below it.
Always ensure the generator is on a firm
surface when ironing.
Before use
Remove any protective sticker from the
soleplate and the cabinet, if any.
Textiles and clothes are supposed to carry
ironing instructions. If they don’t, you should
follow the fabric guide on page 3, but be sure
to test the temperature by ironing the hem of
the garment or similar area first.
If you turn the control dial down from a
hot setting to a cooler setting, wait until the
iron temperature has stabilised before you
continue ironing.
Filling
1
Place the steam generator on a stable
ironing board or table, with the iron resting
on it’s stand.
2
Remove the detachable water tank by
sliding outwards
A
.
3
Remove the anti-scale
cartridge by pulling
upwards
B
.
⁄
¤
‹
›
fi
fl
‡
·
A
B
‰
‰
Â
O
I
‚
„
42271 rev4 30/7/08 15:56 Page 4
