background image

2

     Do not let the lead run across an open 

Important safety instructions

space e.g. between a low socket and 

The use of any electrical appliance requires 

table. 

the following common sense safety rules.

     Do not let the lead run across a cooker 

Primarily there is danger of injury or death 

or toaster or other hot area which might 

and secondly the danger of damage to the 

damage the cable. 

appliance. These are indicated in the text by 

     Do not place the kettle where the mains 

the following two conventions: 

lead could fall into a sink.

WARNING: Danger to the person! 

Your safety

 

IMPORTANT: Damage to the appliance! In 
addition we offer the following safety advice.

•    

Always pour hot water slowly and 

carefully without tipping the kettle too 

Location

 

fast to prevent splashing and spillage.

     Always keep your kettle away from the 

•    

Extreme caution must be used when 

edge of the worktop.

moving a kettle containing hot water. 

     Ensure that the kettle is used on a firm, 

     Do not touch hot surfaces, use handles 

flat surface. 

or knobs. 

     Do not use the kettle outdoors or in a 

     Always close the lid securely, otherwise 

bathroom. 

the kettle may not switch off 

WARNING: Do not place the kettle onto a 

automatically and may spit out boiling 

metal tray or metal surface whilst in use. 

water. 

Children

  

     Avoid contact with steam from the 

spout when the water is boiling or just 

     Children do not understand the 

after it has switched off. 

dangers associated with operating 
electrical appliances. Never allow 

•   

 Take care if opening the lid for re-filling 

children to use this appliance. 

when the kettle is hot. 

    Teach children to be aware of dangers 

     Do not fill above the MAX mark, 

in the kitchen, warn them of the 

otherwise boiling water may be ejected.

dangers of reaching up to areas where 

•   

 Do not hold the switch in the on 

they cannot see properly or should not 

position or tamper with the switch to fix 

be reaching. 

it in the on position as this may cause 

Mains lead 

damage to the switch-off mechanism. 

     The mains lead should reach from the 

     Unplug from the outlet before cleaning.

socket to the base of the unit without 

     Allow to cool before putting on or taking 

straining the connections.

off parts and before cleaning. 

     Do not let the mains lead hang over the 

edge of the worktop where a child 
could reach it. 

Summary of Contents for Voyager 300







Reviews: