8
13. Lift the arm into an upright position & install the hydraulic
cylinder assembly.
*Note-That there may be 2 different kits with unit for hydraulics.
Use only the applicable kit.
You will need to carefully try to remove any paint from the cylinder
shaft. After the cylinder is secure, push upward on the arm and lock
into place.
13. Attach the manual rope release with the rope, thimbles and rope
clamps provided. One rope is longer than the other. After each is
attached to either side, simply pull taut and clamp together for one
pull.
Release
Lock
Summary of Contents for MH 420
Page 1: ......
