3
1
Adjust raiser height before fitting. Secure height adjustment using screw & plastic nut.
2
a
b
ADJUST LENGTH
TO SUIT
a
b
Tighten all long hand wheels to clamp the legs in place (fig 3a). Tighten short hand wheels on side of raisers to lock the
raiser's length (fig 3b). Finally, ensure the furniture is stable before use.
PROTECTOR CAP
TIGHTENED AGAINST Leg
Fit one raiser at a time. If the furniture has inverted shaped pyramid feet which are too steep to effectively clamp to,
secure the leg using wood screws (not supplied) through the holes located in the base of the square cup (fig 1). Do not
screw into plastic legs.
