Function operation (ONLY by remote control)
Note: During the operation of the remote control, remote control transmitter must aim at remote control receiving
area of product, avoid remote control ineffective
1.
Press”
“, the product enters into working status. See below image A
2.
Press ”
“ button for one time, the product works with low heating and display shows“-- /
” See below
” light on. See
image B
. Press again, changes to high heating and display shows“--
“
at the same time
”
below image C:
A
B
C
3. The timer
of remote control operates as same as the timer button on unit body.
4. Set current TIME/DAY (can set both under standby mode & working status):
1.Press
“
“button for one time, the display shows”12“ as default, press “
/
”to set current hour (total
in 24hours)
; press “ “ again, the display shows minute “ 30“, press” /
“ to set current minute (00~59
minutes),
then press “ “ for third time, the display shows the day“ ”, press “ /
“ to set current
day (Monday-Sunday: d1-d7). Then press
‘’
‘’ to confirm the setting, the display will show previous settings.
For example: Setting to Wednesday, 9:30 AM under 25
℃
under II heating, pls. refer to the following photos:
