2
ENGLISH
ATTENTION REMARKS
:
•
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children without supervision.
•
Children of less than 3 years should be kept away unless continuously supervised.
•
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it
has been placed or installed in its intended normal operating position and they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved.
•
Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or
perform user maintenance.
•
CAUTION — Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•
WARNING: In order to avoid overheating, do not cover the heater
•
The heater must not be located immediately below a socket outlet.
•
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
•
WARNING: This heater is not equipped with a device to control the room temperature. Do not use this
heater in small rooms when they are occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
1. Description
1. Heated air outlet
2. Control panel
3. Supporting legs
4. Cold air inlet
5. Appliance body (front face)
Delivery set
1. Heater-1 pc
2. Supporting legs-2pcs
3. Mounting screws for supporting legs-2 pcs
4. Operation manual and warranty certificate-1 pc
5. Package-1 pc
2. Installation
(
Please install the Castors before using
)
1. Open the original package and carefully take the appliance out.
2. Remove foam plastic seals from edges of the appliance and free it
of polyethylene.
3. Take 2 supporting legs from the heater package.
4. Turn over the appliance so that its lower part looks up.
