6
after waiting for 5 minutes , making sure that
the compressor’s using life longer
Mode Selection
1. Press the power supply and select operating
mode (the initial default is wisdom
dehumidifying)
2.
Selecting the wisdom dehumidifying , normal
dehumidifying, powerful dehumidifying , air
clean sequentially
■
Air clean : start the fan and supply air , make
the indoor air circulation ; Do not start the
compressor , for no dehumidifying effect .
■
Normal dehumidifying : to set the bass slowly
to reach the required humidity setting .It is
suitable used on the condition that sleeping at
night , quiet environment and the indoor
humidity is not high .
Power dehumidifying : humidity can not be set .
Especially against the high humidity
environment , setting the dehumidifying no
interruption function . Suitable for clothes
drying or person who needs low humidity
space.
■
Wisdom dehumidifying : adjust the fan speed
automatically , in order to reach the most
suitable body environment 55% relative
humidity. When the environment humidity is
70% or higher , the powerful dehumidifying
will operate automatically . When the
environment humidity is 55%-70% , the normal
dehumidifying will work ; When the
environment humidity is less than 55% , it
becomes the mode of air clean.(Note : can not
choose the humidity in automatic mode)
Humidity Selection
1.
Press the “mode”, in the mode of “normal
dehumidifying”, you can choose the
humidity.(can not choose the humidity at the
mode of the air clean , wisdom dehumidifying
and powerful dehumidifying)
2.
Press the LED screen’s up and down keys on
the left and right sides , select the humidity
setting of 30%~80% (Note : the initial use
humidity presetting is 55%)
If the indoor humidity is higher than the
setting humidity , the compressor will start.
If the indoor humidity is lower than the setting
humidity , the compressor will shut down.
After the 5 seconds , the humidity display is no
longer flashing , meaning the setting is
successful.
3.
Continuous dehumidifying : at the mode of
“ Normal Mode “ , you can choose the continuous
dehumidifying function . Press the LED screen’s
up and down keys on the left and right sides ,
select the CO (continuous) , meaning that the
dehumidifier will operate continuous .
Digital display screen
The screen will display the relative humidity and
time (Depending on the setting)
1. When the dehumidifier is operating at the
required humidity mode , the screen will display
the environment humidity .
2.
Select the timing , the screen will display the
running time which the dehumidifier is setting ,
1~12 hours .
Time Setting
1.
Press the “timing”key , and the LED
screen’s up and down keys on the left and
right sides , select the operation time setting
0-12 hours .
