8
3.
Taking the handle level out of the water tank
gently , holding the water tank on its both
sides .
4.
After pouring out the water , return the water
tank to the machine body until positioning
5.
The running indicator light is light up , and the
full water indicator light will go out .
Note : in order to avoiding the compressor
breakdown caused by intermittent start , do not
repeat the action of the water tank’s “taking
out”and “replacing”
Drain pipe’s connecting
It can continuous drainage after the installation .
1.Take out the water plug cover in back cover’s
outlet , and pull out the water plug .
2.Put the water pipe inserted into the machine
body’s continuous drain hole , make the drainage
hole inserted into the drain pipe.
3.Put the water pipe’s the other end into the floor
drain , checking whether the pipe is straight and
then connected to the drain
Notes:
■
If do not use the water pipe but the water tank ,
please remove the water pipe first , then put
back the water plug and water plug cover
■
Whatever you use the water pipe to do the
continuous drainage or not , the water tank
must be put back to its positioning , in this way
the dehumidifier will begin to operate .
Normal sound
When the dehumidifier operates normal , you will
hear the following sound .
Compressor sound , this sound may be louder ,
this is the normal phenomenon .
When the dehumidifier or the compressor close
and starts , and turn off the switch
automatically and operates , makes a snapping
sound .
The fan air flowing sound
