3.
Use the “+” and “-” buttons [b] and [e] to set the heater operation time
between 1 and 24 hours. 0.0-5.0 hours increase by 0.5 hours, 5.0-24 hours
increase by 1 hour. This function will activate once the hour digit stops blinking.
The countdown digits will show on the display.
4. The heater will automatically turn on when the time runs out.
Remark: After the timer power on setting, make the power and ECO mode
settings. And under ECO mode, make the temperature settings. So that the
heater will turn on at the desired temperature or power setting.
Note : When using timer modes, consideration should be given to the fact that
the heater may come on whilst unattended. Always follow the safety
instructions provided.
Timer: Auto power off
Note: This function should only be set if you require the heater to be
automatically shut off after a certain period of time (1 to 24 hours from the time
the function is set)
1. During heater function press the Timer button(d), the light on( ) will turn on,
and the start hour digit (0.0) will blink.
2.
Use the “+” and “-” buttons [b] and [e] to set the heater operation time
between 1 and 24 hours. 0.0-5.0 hours increase by 0.5 hour, 5.0-24 hours
increase by 1 hour. This function will activate once the hour digit stops blinking.
The countdown digits will show on the display.
3. The heater will automatically shut off when the time runs out.
Off
Press the stand-by button [f] until sleep mode is selected and the control panel
screen goes off.
Press the on/off switch [F] to turn the appliance off completely.
To disconnect the appliance, remove the plug from the socket.
Care and Cleaning
1. The electric heater should be cleaned regularly.
2. Disconnect the electricity supply and allow radiator to cool, wipe with a soft
damp cloth. Do not use detergent or abrasives.
3. Do not scrape the surfaces with sharp hard tools.
4. Important - any cut off plug should be disposed safely to prevent a hazard.
There is a danger of electric shock if a cut off plug is inserted into a socket
outlet.
