OPERATION
Menu / Cleaning
Touch
navigation sensor fields to select
cleaning from main menu and touch The
following screen will be displayed:
If no changes are made within 3 minutes, the
appliance switches to standby mode.
Pour water into baking tray, close the door
and touch . sensor field to start the pro-
gramme. The programme is started. In box
2 of the preset programme COOK TIME
changes to END TIME and consequently
cook time of 0:30 is replaced with end time
and the remaining time is shown on the
progress bar. Once the programmed cook
time has elapsed, all functions except cooling
fan are turned off (see: Cooling fan operation)
and an acoustic signal is sounded (4 beeps /
pause / 4 beeps).
The sequence is repeated every 3 seconds
for about 5 minutes. The display shows the
temperature set for the oven chamber and
END TIME and symbol is flashing.
Touch to acknowledge and mute the
acoustic signal. After this, the appliance
switches to standby mode.
Cooling fan operation
Cooling fan is started whenever oven cham-
ber temperature exceeds 50°C regardless
of any heating function operating or not. In
order for the cooling fan to be started both
protection relay and cooling fan delay must
be on.
Once cooking is finished the display shows
current time and oven chamber temperature
bar.
Lighting
According to an option selected in Menu /
Setup / Lighting, lighting is switched on when
any heating function is in operation. Regard-
less of the option selected in Menu / Setup/
lighting, light illuminates continuously when
oven chamber door is opened and it turns off
when the door is closed.
Opening the door during cook time discon-
nects the heating elements and convection
fan motor (if used). Normal operation is
resumed after that door is closed.
31
Summary of Contents for MOF-64510
