USING THE APPLIANCE
CHOPPING
- Place the blade (C) onto the axis (F) in the bowl (B) and place the
ingredient to be chopped in the bowl.
- Fit the lid (D) on to the bowl (B) by turning it until it locks into
place.
- Place set the motor unit (A) on to the bowl/lid by turning gently, in
order to push the blade axis into the motor unit axis.
- Plug in the appliance.
- Press the control switch (E) and keep it pressed in, the appliance
will start working.
- Release the button (E) and wait for the blade to stop.
- Remove the motor unit (A) by pressing the button (G) and
unlocking the lid (D) by turning in the opposite direction where it
was assembled. Remove the blade (C) carefully.
BLENDING
- Place the blade in the bowl as shown for chopping.
- Pour the liquid to be blended into the bowl.
- Do not fill above the 0.61 mark indicated.
3