3.Step to remove the elements of water valve
Use the screwdriver and make the edge directs to the water valve elements
and then insert it in the free place that highlights outskirt, rotates the
screwdriver clockwise or anticlockwise, with the screwdriver moving, when it
tops the penstock, extracts the water valve elements by hands at the direction
of above 45
e
(You can not remove the elements of water valve)
Step 2: Clean up
1.Remove the water box itself, and the water box cover, the seal ring and the
water valve elements
2.Clean up the elements of the water box with cold or warm water.
3.Wipe out the water with dry cloth
Notes:
1.If you clean the water dispenser by cleaning solution, you had better put the
box to its originally position, and drain 5 to 6 cups of water out, then you can
use it normally, in case that there is remaining dirt of application instruction.
Step 3: Installation
,QVWDOODWLRQRIZDWHUYDOYHHOHPHQWV
3XWWKHJXLGHSURMHFWLQJSODWIRUPGLUHFWHGWRWKHJXLGHJURRYHDIWHUWKDWSXVK
LWGRZQVLGHZLWKeVODQWO\DWIXOOWLOWXQWLO\RXKHDUDFUDFN
