background image

The Specialist In Drum Handling Equipment

MODEL 285A-HD

Heavy-Duty Forklift-Karrier

Operator’s Manual for Morse Heavy-Duty Forklift-Karrier Model 285A-HD

Serial Number 0209 to 1110 (MMYY)

MorseDrum.com

Copyright 2010  -  Morse Mfg. Co., Inc. 

 

Form PL285A-HD (0209-1110) 

(Updated November 19, 2010 9:57 AM)

 

       

2

Safety Information

 (continued)

DANGER 

- Indicates a situation which, if not avoided, will result in serious injury or death.  

This signal word is limited to the most extreme situations.

WARNING 

-  Indicates  a  situation  which,  if  not  avoided,  could  result  in  serious  injury  or 

death.

CAUTION 

- Indicates a situation which, if not avoided, can result in damage to the machine.

WARNING 

- The Heavy-Duty Forklift-Karrier is designed to handle one drum of the types listed at the 

top of page 3.  Machine Description.  DO NOT attempt to handle any other type of drum or object.  

DO NOT exceed the weight capacity of 1500 Lb. Exceding these ratings is unsafe and could result in 

equipment damage, excessive wear or awkward handling.

WARNING 

- Do Not Modify the Unit. Under no circumstances should any modifications be made to 

the Morse machinery without factory authorization.  Any modifications may void the warranty.  This 

machine was designed to perform a specific job and alterations may result in injury to operator or 

machine.

WARNING 

- No Loose Fitting Clothing. Wear close-fitting clothing and safety equipment appropriate 

to the job.  Loose fitting clothing may become caught on the machinery and cause severe personal 

injury.

CAUTION 

– Do Not Transport with Drum Raised. Always lower the drum holder to lowest position 

before transporting.

CAUTION 

- Wear safety shoes with non-slip soles and hard toe protection.

CAUTION:  

DO NOT allow drum to impact on floor, ground, or dumping station, etc.

Summary of Contents for 285A-HD








Reviews: