The Specialist In Drum Handling Equipment
Kit # 4804-P
Wireless Remote Control Kit
Installation Instructions for Morse Wireless Remote Control Kit (Part # 4804-P) for field installation on
Model 285A-BP or 285XBP Forklift-Karrier with serial number 0510 to ____ (MMYY), 289F Fork Mounted Drum
Racker or 289C Carriage Mounted Drum Racker
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL4804
(0510-____)
(Updated 11 Jun, 2019)
5
14. For wireless operation, unplug pendant
and plug male plug from receiver into
female plug of pump.
Note: If wireless does not work, proceed to
programming,
To synchronize a new transmitter and receiver together, use
the following procedure.
Remove receiver cover and apply power to the receiver by
1.
plugging in 12v main battery.
Remove jumper from storage pin and place over both pins
2.
for a couple of seconds, both green and red lights will toggle
inside the receiver. Place jumper back on storage pin.
To get transmitter into teach id mode press and hold the
3.
POWER button, button 1 and button 5. At this point, both
lights will blink on the transmitter.
Instructions for Programming the Wireless Remote
Release the POWER button
4.
and wait for 1 second or
until the green and red lights
stop toggling in the receiver.
Release the other buttons.
Teach complete.
5.
