The Specialist In Drum Handling Equipment
Kit # 4804-P
Wireless Remote Control Kit
Installation Instructions for Morse Wireless Remote Control Kit (Part # 4804-P) for field installation on
Model 285A-BP or 285XBP Forklift-Karrier with serial number 0510 to ____ (MMYY), 289F Fork Mounted Drum
Racker or 289C Carriage Mounted Drum Racker
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc.
Form PL4804
(0510-____)
(Updated 11 Jun, 2019)
6
Programming the transmitter to operate the tilt functions.
Turn transmitter on by pressing and holding the POWER
1.
button for a couple of seconds.
Unplug main 12v battery to turn receiver off.
2.
Refer to transmitter diagram and press buttons 1, 4 and 5
3.
simultaneously, red light will flash twice per second.
Plug in battery to turn receiver on, receiver will flash green.
4.
Press POWER button on transmitter for a couple of
5.
seconds, receiver flashes red.
Press button 3 for a couple seconds, then press POWER
6.
button for a couple of seconds. Note: red light will flash 3
times in receiver each time POWER button is pressed.
Press button 1 for a couple of seconds.
7.
Press POWER button.
8.
Press button 1 for a couple of seconds.
9.
Press button 2 for a couple of seconds.
10.
Press POWER button, red light in receiver will blink.
11.
Test unit function for forward and reverse operation.
Press POWER button on transmitter.
1.
POUR button will now operate the forward tilt function.
2.
RETURN will now operate the reverse tilt function
3.
