background image

The Specialist In Drum Handling Equipment

Model 515-N-115

Vertical-Lift Drum Pourer, Scale-Equipped,  

60”, DC Power Lift and Tilt

Operator’s Manual for Morse Model 515-N-115

with Serial Number 249855 to ______

morsedrum.com

Copyright 2022  -  Morse Mfg. Co., Inc. 

 

Form OM515-115 (249855-______) 

(Updated 23 Feb, 2022) 

2

Safety Information

 (continued)

DANGER 

- Indicates a situation which, if not avoided, 

will

 result in serious injury or death. 

This signal word is limited to the most extreme situations.

WARNING 

- Indicates a situation which, if not avoided, 

could

 result in serious injury or 

death.

CAUTION 

- Indicates a situation which, if not avoided, can result in damage to the machine.

CAUTION 

-

 

Do NOT transport with drum raised. 

 

Always lower the drum holder to lowest position before transporting.

DANGER 

- Stay well clear of power lines. 

 

Never approach a power line. Current in a high voltage line may arc some distance from the wire to the steel framed, 

grounded machine.

WARNING 

- The Vertical-Lift Drum Pourer is designed to handle one drum of the types listed at the top of page 

3 - Machine Description. DO NOT attempt to handle any other type of drum or object.  DO NOT exceed the weight 

capacity of 800 Lb. (363 kg).

WARNING 

- Level floors only. 

 

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, ramps, irregular or 

debris strewn floors.

WARNING 

- Do NOT modify the unit. 

 

Under no circumstances should any modifications be made to the Morse machinery without factory authorization. Any 

modifications may void the warranty. This machine was designed to perform a specific job and alterations may result in 

injury to operator or machine.

WARNING 

- No loose fitting clothing. 

 

Wear close-fitting clothing and safety equipment appropriate to the job. Loose fitting clothing may become caught on 

the machinery and cause severe personal injury.

WARNING 

- Hydraulic fluid under pressure can be hazardous. 

 

Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury. Avoid the hazard by relieving 

pressure before disconnecting hydraulic lines. Keep hands and body away from pinholes and nozzles, which eject fluid 

under high pressure. Use a piece of cardboard to search for leaks. If an accident occurs, see a doctor immediately and 

inform them of the nature of the accident.

CAUTION 

- Wear safety shoes. 

 

Wear safety shoes with non-slip soles and hard toe protection.

WARNING:

 This product can expose you to chemicals including lead and arsenic, which are known to the State of 

California to cause cancer and birth defects or other reproductive harm.  

For more information go to 

www.P65Warnings.ca.gov

WARNING: 

This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the 

State of California to cause birth defects or other reproductive harm.  

For more information go to 

www.P65Warnings.ca.gov

Summary of Contents for 515-N-115







Reviews: