background image

The Specialist In Drum Handling Equipment

Model 405-114

Omni-Lift Karrier

Operator’s Manual for Morse Omni-Lift Karrier Model 405-114

Serial Number 0617 to ____ (MMYY)

morsedrum.com

Copyright 2019  -  Morse Mfg. Co., Inc. 

 

Form OM405-114 (0617-____) 

(Updated June 12, 2019 3:30 PM)

           

2

Safety Information

 (continued)

DANGER 

- Indicates a situation which, if not avoided, will result in serious injury or death.  

This signal word is limited to the most extreme situations.

WARNING 

- Indicates a situation which, if not avoided, could result in serious injury or 

death.

CAUTION 

- Indicates a situation which, if not avoided, can result in damage to the machine.

CAUTION 

– Do Not Transport with Drum Raised. Always lower the drum holder to lowest position 

before transporting.

WARNING 

- The Omni-Lift Karrier is designed to handle one drum of the types 

listed below.  Machine Description.  DO NOT attempt to handle any other type 

of drum or object.  DO NOT exceed the weight capacity of 800 Lb. (363 kg).

WARNING 

- Do Not Modify the Unit. Under no circumstances should any modifications be made to the Morse 

machinery without factory authorization.  Any modifications may void the warranty.  This machine was designed to 

perform a specific job and alterations may result in injury to operator or machine.

WARNING 

- No Loose Fitting Clothing. Wear close-fitting clothing and safety equipment appropriate to the job.  Loose 

fitting clothing may become caught on the machinery and cause severe personal injury.

CAUTION 

- Wear safety shoes with non-slip soles and hard toe protection.

CAUTION:  

DO NOT allow drum to impact on floor, ground, or dumping station, etc.

Machine Description

The Omni-Lift Karrier is designed to lift, transport, and rack a ribbed 55-gallon 

(210 liter) steel drum 22.5” (56 cm) in diameter. The maximum full-drum capacity 

is 800 Lb. (363 kg). The capacity is derated to 500 Lb. (227 kg) for a half-full 

drum. The half-full rating is based on the tilt mechanism’s capacity for handling an 

unbalanced bottom-heavy drum.

Option # 3313-P to Rack a Plastic Drum

A rimmed 55-gallon (210 liter) plastic drum can be handled with Option # 3313-P 

installed. 

Omni-Lift Karrier  

with Option 3313-P installed.

WARNING: 

This product can expose you to chemicals including barium 

sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are 

known to the State of California to cause cancer, and bisphenol-A, 

which is known to the State of California to cause birth defects or other 

reproductive harm.  

For more information go to 

www.P65Warnings.ca.gov

Summary of Contents for Omni-Lift Karrier






Reviews: