Morso 5660 Standard Insert, Instructions For Installation And Use Manual

DK ENG

3.1 external maintenance

The  cast  surface  of  the  stove  is  painted  with  heat-resistant  Senotherm  paint.  It  is  best 
 maintained by simply vacuuming it with a soft brush attachment or wiping it down with a dry, 
dust-free cloth.

If the stove is used too vigorously, the painted surface may assume a greyish tinge over time, 
but the stove can easily be freshened up with Morsø spray paint, which is available from your 
local retailer.
Morsø stoves are painted in Morsø charcoal or Morsø light grey. The paint is available either 
as a spray or in tins.

3.2 Internal maintenance

Glass window
If  the  stove  is  used  correctly,  very  little  or  no  soot  will  be  deposited  on  the  ceramic  glass 
window. If soot does form on the glass as the stove is being lit, it will burn away once normal 
combustion begins in the stove. If the glass window becomes thoroughly covered in soot due 
to incorrect operation, the soot can be easily removed using a cleaning agent such as Morsø 
Glass Cleaner. The glass must be cold when you clean it. Avoid stoking the stove with pieces 
of wood that are so long that they press against the glass window when the door is closed.

Interior cast iron parts and other wear and tear parts
Vermiculite  stones  and  other  parts  that  are  in  direct  contact  with  fire  and  burning  fuel  are 
wear and tear parts. As such, they are particularly exposed to being burnt through. Used cor-
rectly, these parts will last many years; but firing too heavily will of course accelerate burning 
through.
The parts mentioned may easily be changed.

If the baffle plate is damaged and not replaced in time, the top plate will be exposed to such 
high temperatures that it may be damaged.

note that unauthorized changes of the construction may not be made, and parts may 
only be replaced with original Morsø parts.

3.0 Routine stove maintenance

Reasons for overly rapid wear of internal parts
- Stove fired too vigorously
- Use of very dry wood (wood from old furniture).
- too much soot on top of the baffles (please see the section on Cleaning).
- too much ash in the ash pan (please see the section on Ash).

Reasons for sooty glass window:
- the fuel is too wet.
- the pieces of fuel are to big/uncut wood.
- the combustion temperature is too low.