MAINTENANCE
M
43
© MOSA
1.0-09/05
NOTE
By maintenance at care of the utilizer we intend all the
operatios concerning the verification of mechanical parts,
electrical parts and of the fluids subject to use or
consumption during the normal operation of the machine.
For what concerns the fluids we must consider as
maintenance even the periodical change and or the refills
eventually necessary.
Maintenance operations also include machine cleaning
operations when carried out on a periodic basis outside
of the normal work cycle.
The repairs cannot be considered among the
maintenance activities, i.e. the replacement of parts
subject to occasional damages and the replacement of
electric and mechanic components consumed in normal
use, by the Assistance Authorized Center as well as by
MOSA.
The replacement of tires (for machines equipped with
trolleys) must be considered as repair since it is not
delivered as standard equipment any lifting system.
The periodic maintenance should be performed according
to the schedule shown in the engine manual. An optional
hour counter (M) is available to simplify the determination
of the working hours.
THE ENGINE PROTECTION NOT WORK WHEN THE
OIL IS OF LOW QUALITY BECAUSE NOT CHARGED
REGULARLY AT INTERVALS AS PRESCRIBED IN
THE OWNER’S ENGINE MANUAL.
NOTE
IMPORTANT
In the maintenance operations avoid that
polluting substances, liquids, exhausted oils,
etc. bring damage to people or things or can
cause negative effects to surroindings, health
or safety respecting completely the laws and/
or dispositions in force in the place.
WARNING
●
Have qualified personnel do maintenance and troubleshooting work.
●
Stop the engine before doing any work inside the machine. If for any
reason the machine must be operated while working inside, pay
attention moving parts, hot parts (exhaust manifold and muffler,
etc.) electrical parts which may be unprotected when the machine
is open.
●
Remove guards only when necessary to perform maintenance, and
replace them when the maintenance requiring their removal is
complete.
●
Use suitable tools and clothes
.
●
Do not modify the components if not authorized.
- See pag. M1.1 -
HOT surface
can
hurt you
MOVING
PARTS
can injure
05/09/05 M43GB
ENGINE and ALTERNATOR
PLEASE REFER TO THE SPECIFIC MANUALS
PROVIDED.
VENTILATION
Make certain there are no obstructions (rags, leaves or
other) in the air inlet and outlet openings on the machine,
alternator and motor.
ELECTRICAL PANELS
Check condition of cables and connections daily.
Clean periodically using a vacuum cleaner, DO NOT
USE COMPRESSED AIR.
DECALS AND LABELS
All warning and decals should be checked once a year
and replaced if missing or unreadable.
STRENUOUS OPERATING CONDITIONS
Under extreme operating conditions (frequent stops and
starts, dusty environment, cold weather,extended periods
of no load operation, fuel with over 0.5% sulphur content)
do maintenance more frequently.
BATTERY WITHOUT MAINTENANCE
DO NOT OPEN THE BATTERY
The battery is charged automatically from the battery
charger circuit suppplied with the engine.
Check the state of the battery from the colour of the
warning light which is in the upper part.
- Green colour: battery OK
- Black colour: battery to be recharged
- White colour: battery to be replaced
