ASSEMBLY
CTL 20
M
6.20
REV.0-09/12
To assemble the generating set on the trolley CTL 20
please keep to following instructions:
1) - Lift the generating set (by means of a suitable
hook).
6) - Assemble on the machine the towbar (5) complete
of foot with the M10x20 and M10x25 screws, nuts
and washers.
7) - Assemble the axle (7) to the base of the machine
with the M10x20 screws and relative washers (two
per part) so that their supports coincide.
8) - Insert the wheel (9) on the axle then screw the self
blocking nuts (8).
9) - Pump the tyre (9) fixing the pressure to four atms.
10) - Lower the machine to the ground and place the
parking foot definitively (regulating at the suitable
height).
ATTENTION
Do not substitute the original tires with other types.
7
8
9
!
Nota
:
Lift the machine and assemble the parts as shown in the drawing
TRAILERS
The machines provided for assembling the accessory (slow towing trolley) can be towed up to a
maximum
speed
of
40 Kms/hour
on asphalted surfaces.
Towing on public roads or turnpikes of any type
IS
EXCLUDED
, because
not
in possesion of the requirements by
national and foreign traffic norms.
ATTENTION
The CTL accessory cannot be removed from the machine and used separately (actioned manually or following vehicles) for
the transport of loads or anyway for used different from the machine movements.
!
10/06/00 M6GB
Summary of Contents for GE 20 YSX
Page 27: ...Comandi Controls Commandes Mandos GE 20 YSX M 31...
Page 50: ......
