6
To use in a Home Theatre system
.
(Dolby ProLogic, AC3, DTS, etc…)
Put the frequency cut off level control of the subwoofer
②
on 150Hz. Set the level of amplification
①
of the subwoofer
to midlevel. All other settings (equalizing of the subwoofer
with the main speakers) will be done from your AV
amplifier.
For use in a triphonic system (2.1)
For this solution, adjust the level of the subwoofer and its
cut off frequency to the level of the main speakers.
Setting the phase
After having found the best position for the subwoofer in
your room, you can set the phase. The switch ③ can set
from 0° to 180°:
0°:
The subwoofer is in phase with the electric signal
coming from the amplifier.
180°:
The subwoofer is in phase opposition.
The optimum setting of the phase is subjective. The switch
should be set on the position where the subwoofer delivers
the most bass.
Technical information
.
- Digital amplifier
- 2 line input
- Auto On / Off switchable
- Adjustable high cutoff frequency from 80 to 200 Hz
- Phase adjustment 0 ° to 180 °
- Adjust the frequency response in the bass
- Sets the lower cutoff
- Adjustable level of presence of bass in the frequency
range (BASS EXTENSION)
Packet weight
Titan 5.6:
13.5 Kg
Titan 7.6 MK2: 14.5 Kg
Titan 11.6 MK2: 19 Kg
Titan 15.6 MK2: 27 Kg
EAN Codes
Titan 5.6 (Black):
0628586586499
Titan 7.6 MK2 (Black):
0628586586413
Titan 11.6 MK2 (Black):
0628586586420
Titan 15.6 MK2 (Black): 0628586586437
Setup
Specifications
TITAN 5.6
TITAN 7.6 MK2
TITAN 11.6 MK2
TITAN 15.6 MK2
Dimensions
29 x 29 x 29 cm
34 x 34 x 34 cm
39 x 39 x 39 cm
44 x 44 x 44 cm
Weight
12 Kg
13.5 Kg
17.8 Kg
25 Kg
Frequency range
35 to 200 Hz
30 to 200 Hz
25 to 200 Hz
20 to 200 Hz
Power
200 W
300 W
300 W
300 W
