55
6.
Protections and Error Messages
6.1
Over-voltage Protection (OVP)
When the OVP is activated and voltage measured is over the setting point of
protected voltage, system will enter the “ Over Voltage Protect” mode that will
shut off the output and show OVP on the display. Press
to reset the
protection mode and deactivate buzzer.
= 36 .
.
=
.
40
.
F
F
6.2
Over-current Protection (OCP)
When the OCP is activated and current measured is over the setting point of
protected current, system will enter the “ Over Current Protect” mode that will
shut off the output and show OCP on the display. Press
to reset the
protection mode and deactivate buzzer.
.
6
3
=
.
10 .
=
.
FF
6.3
Overpower Protection (OPP)
When the OPP is activated and power measured is over the setting point of
protected power, system will enter the “ Over Power Protect” mode that will
shut off the output and display OPP on the screen. Press
to reset the
protection mode and deactivate buzzer.
.
6
3
=
.
10 .
=
.
FF
Summary of Contents for DS10014
Page 1: ...DS3640 DS6024 DS8018 DS10014 Programmable DC Power Supply User s Manual...
Page 92: ......
Page 93: ......
Page 94: ...ZOMG 3640ME 2...
