6
3. Notices before Using
3.1 Confirm Attachment before Using
Please follows the below items to protect your rights as you receive this instrument.
1. If there is ruin or scratch bad condition on product overlook.
2. The standard attachment as table 7-1, please confirm if there is any missing.
※
If above conditions, please inform us for prompt service.
3.2 The Description of Using
The tester is an accurate instrument. Please read through this manual to prevent
improper operation and arbitrary using from causing this instrument damaged.
Please calibrate once a year for keeping accuracy.
3.3 Ambient Environment
1. Do not use this instrument in an environment with dusts, vibrating, and corrosive
gas and do not explore this machine directly to the sunlight. Please use this
instrument in an environment that the ambient temperature is in 0~40°C and the
relative humidity is in 20%~80%. If the temperature is over 40°C
, please don’t
use temporary until the temperature is back to normal to avoid the unit damaged
caused by the over temperature.
2. The tester is equipped with a cooling fan on the rear panel to keep the internal
temperature down, so adequate ventilation should be ensured. The tester
should be located at least 10cm from any object or wall behind it. Do not block
the ventilation holes to keep the tester in good precision.
3. The tester has been carefully designed to prevent the noise from the AC power
source. However, it should be used in the noise-free environment as low as
possible. If noise is inevitable, please install a power filter.
3.4 Storage
The tester should be stored within the temperature range -10°C~70°C, the relative
humidity 80% RH. If the unit is not to be in use for a long time, please store it in the
original or similar package and keep it from direct sunlight and humidity.
Summary of Contents for LPS 505N
