4
fitting your child seat into your car
8
Pull the shoulder
straps through the
buckle connectors,
then pull both
shoulder straps and
shoulder pads
through the back of
the seat.
Remove the shoulder straps from the metal
yoke.
Pull the harness adjuster until the metal yoke
is tight against the back of the seat base.
The end of the harness adjuster which is left
can be fed back into the slot in the cover for
storage for future use.
To set up for use from 15kg to 25kg
1
2
2
a
3
9
Your child will be secured using the vehicle’s
seat belt.
It will therefore be necessary to remove the
harness fitted to the child seat before use.
Turn the seat upside down and remove the
blue plastic clips from the ends of both of the
shoulder straps.
Feed the straps through the bottom of the
child seat.