returning the seat to its configuration for younger children
10
AFTER YOU HAVE USED THE CHILD SEAT FOR AN OLDER CHILD
(GROUP 2 OR 3) YOU MUST FOLLOW THE GUIDELINES BELOW
WHEN RE-USING THE SEAT FOR A YOUNGER (GROUP 1) CHILD.
1
2
Re-fit the back of the child seat. To do this, lay
the seat back flat. Engage the two locating
pegs and lift upwards as shown.
Then press down firmly on the back of the
seat so that the two pegs engage securely.
Remove the diagonal belt clip.
9
final checklist
However safe a child seat is, however well built it is, your childs’ safety depends on
you.
Read this final checklist once you have fitted your child seat in your car.
1.
Check that you have adjusted the harness to suit your child.
A fitting for winter clothes will be too loose for a child wearing summer clothes.
2.
Check you have installed your child seat properly using a 3 point lap and diagonal belt.
See section 8, fitting your child seat into your car.
3.
Check that your child seat is secure before each journey.
REMEMBER:
mis-using your child seat will reduce the protection and safety you
offer your child.
IF YOU ARE UNSURE ABOUT THE FIT OF YOUR CHILD SEAT
PLEASE VISIT YOUR LOCAL MOTHERCARE STORE FOR ADVICE
12
