16
The lamp and the lamphouse become very hot during and after
a period of operation.
Risk of burn – Do not touch the lamp during or immediately
after period of operation.
Make sure the lamp has cooled sufficiently before attempting
to replace the lamp.
Don’t pick up from the bottom during equipment operation.
8. Care And Maintenance
A. Do not disassemble
1. Disassembly may significantly affect the performance of the
instrument, and may result in electric shock or injury and will
void the terms of the warranty.
2. Never attempt to dismantle any parts other than described
in this manual. If you notice any malfunction, contact your
nearest Motic representative.
B. Cleaning the Microscope
• Do not use organic solvents such as ether; alcohol or paint
thinner on painted surfaces or plastic components. Doing so
could result in discolouration of painted or plastic surfaces.
• When cleaning lenses do not use any solvents other than
absolute alcohol as, they may damage lens bonding cement.
• Do not use petroleum benzene when cleaning components
such as filters or lenses.
• Absolute alcohol and petroleum benzene are highly flamma-
ble. Keep away from open flames and when turning the power
switch on or off.
• For stubborn dirt, dampen a piece of gauze with diluted neu-
tral detergent and wipe lightly.
C. Disinfecting the Microscope
• Follow the standard procedures for your laboratory.
D. When not in use
• When not in use, cover the instrument with vinyl dust cover
and store in a place low in humidity where mould is not likely
to form.
• Store the objectives, eyepieces and filters in a container or
desiccator with drying agent.
• Proper handling of the microscope will ensure years of trouble
free service.
• If repair become necessary, please contact your Motic agency
or our Technical Service direct.
Note:
• If equipment is used in a manner not specified by the manu-
facturer, the protection provided by the equipment may be
impaired.
• To avoid getting wet, do not use the microscope near water.
9. Warning labels
The following warning labels (or symbols) are found on the mi-
croscope, study the meaning of the warning labels (or symbols)
and always use the equipment in the safest possible manner.
Proper handling of the microscope will ensure
years of trouble free service.
If repair become necessary, please contact your
Motic agency or our Technical Service directly.
Indicates that the surface becomes
hot, and should not be touched with
bare hands.
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
Indicates alternating current.
CAUTION! Risk of danger.
Please consult documentation in all
cases where this symbol is used.
